Silent generator set is widely used in noise sensitive environments such as schools and residential areas due to their low noise, environmental friendliness, and energy efficiency. To ensure its safe operation, the following precautions should be taken when using it:
1、 Installation and Site Selection of Silent Generator Set
Ventilation conditions ensure that there are no obstacles within at least 1 meter around the unit, and the air inlet and outlet are unobstructed.
Stable foundation, placed on a flat and sturdy ground or dedicated base to prevent excessive vibration during operation.
When installing outdoors, it is necessary to install a rain shelter to prevent rainwater from directly wetting the unit.
Stay away from flammable materials and maintain a distance of at least 2 meters from them. Install a fireproof cover on the exhaust pipe.
2、 Silent generator set pre run check
Fuel and engine oil, use clean diesel that meets standards, and maintain sufficient fuel in the tank. Check the oil level and replace it regularly.
Battery status, confirm that the battery voltage is normal, the electrodes are not corroded, and the connecting wires are secure.
Cooling system, check the coolant level, and add purified water or specialized coolant if insufficient.
Load matching is recommended to avoid overloading operation, and the total load power should not exceed 80% of the rated power of the unit.
3、 Silent generator set operation specification
Start sequence, first turn on the battery switch, then start the unit, and gradually load after the speed stabilizes.
Monitor parameters and closely monitor oil pressure, water temperature, voltage, and frequency during operation.
Shutdown process, unload the load first, run without load for 3-5 minutes, and then stop to avoid sudden shutdown causing component damage.
4、 Silent generator set security precautions
To prevent the risk of electric shock, wear insulated gloves during operation and prohibit wet hands from touching electrical components. The grounding resistance of the unit should be ≤ 4 Ω to ensure reliable grounding.
To prevent high temperature burns, do not touch high-temperature components such as mufflers and exhaust pipes during operation.
To prevent noise hazards, although it is a silent type, earplugs should still be worn when operating at close range.
The Silent generator set requires standardized operation, regular maintenance, and safety protection to fully utilize its advantages of low noise and high reliability. Users should strictly follow the user manual and receive regular professional training to ensure that the equipment is in good condition.
More information on Silent Generator Set:http://www.huaquan98.com/
