The maintenance of the open frame type generator set air filter is crucial as it directly affects the normal operation and usage time of the generator set. The following are detailed suggestions for maintaining the air filter of the open frame type generator set:
1、 Open frame type generator set air filter regular maintenance
Maintenance cycle: Regularly maintain the air filter according to the operating environment and time of the generator set. Generally speaking, in normal environments, it is recommended to maintain the air filter every 100-200 hours of operation. In heavily polluted environments, such as industrial sites with high levels of dust and particulate matter, the maintenance cycle should be appropriately shortened.
Maintenance content: During maintenance, the dirty filter element should be gently removed from the housing, avoiding tapping the filter housing to prevent damage to the filter element. You can use a soft bristled brush to gently remove dust from the surface of the filter element, or use clean and dry compressed air with a pressure not exceeding 500kPa to blow from the inside out of the filter element to clean the dust and debris on the filter element.
2、 Open frame type generator set filter replacement
Replacement cycle: The filter element of the air filter needs to be replaced regularly. In general, the air filter may need to be replaced after about 1000 hours of operation of the generator set. However, if the air quality in the area where the generator set is used is poor, the replacement cycle of the air filter may need to be shortened accordingly.
Replacement precautions: When replacing the filter element, be sure to ensure that the model and specifications of the new filter element match the original filter element. Do not install recessed or raised filter cartridges as they cannot effectively prevent pollutants from entering. At the same time, ensure that the sealing strip/gasket is not damaged to ensure its normal function.
3、 Open frame type generator set air filter inspection and cleaning
Check intake resistance: Regularly check the intake resistance of the air filter. When the intake resistance is too high or the air filter blockage alarm sounds, the air filter element should be cleaned or replaced in a timely manner.
Clean the intake pipeline: Regularly or irregularly check whether the intake pipeline is damaged, whether the hose is cracked, whether the clamp is loose, etc. If any problems are found, they should be dealt with and replaced in a timely manner.
4、 Other precautions for open frame type generator set air filter
Avoid water ingress: During maintenance, it is important to prevent water from entering the interior of the air filter to avoid affecting its filtration efficiency.
Storage environment: When the air filter is not in use, it should be stored in a dry and ventilated place to avoid moisture and pollution.
Follow manufacturer's recommendations: Open type generator sets of different brands and models may have different air filter maintenance cycles and recommendations.
More information on open frame type generator sets:http://www.huaquan98.com/
