The maintenance precautions for tiny generator include the following aspects. I hope the following introduction can provide users with reference.
1、 Tiny generator daily cleaning and inspection
Maintain cleanliness: Regularly clean the dust, oil stains, and debris on the outer surface of the generator, use a soft cloth or brush for cleaning, and avoid using cleaning agents containing chemicals.
Keep the environment around the generator clean, avoid stacking debris, and ensure good ventilation.
Check the appearance: Check whether the generator casing is damaged, deformed or corroded, and pay special attention to the integrity of the radiator, exhaust pipe and other parts. Check whether the cable connection is firm, whether there is looseness, damage or corrosion, and ensure good insulation of the cable.
2、 Tiny Generator Oil and Cooling System Maintenance
Check oil level and quality: Regularly check the oil level to ensure that the oil is within the appropriate range of the oil dipstick. Observe the color of the engine oil. If the oil becomes darker or contains impurities, it should be replaced in a timely manner.
Replace the oil and filter of the micro generator: According to the manufacturer's recommendations, regularly change the oil and oil filter to keep the engine clean and reduce wear.
Check the coolant: Check the coolant level and quality to ensure that the coolant is sufficient and has not deteriorated. Replace the coolant at regular intervals and check for any water leakage in the cooling system's pipelines and joints.
3、 Tiny Generator Electrical System Maintenance
Check the cables and wiring: Ensure that the cables are firmly connected, have good contact, and avoid voltage drops or short circuits caused by poor contact. Regularly inspect the insulation layer of the cable for damage and replace it if necessary.
Check the battery of the micro generator: For generators equipped with starter batteries, regularly check the battery voltage and electrolyte level. If the battery voltage is lower than the specified value or the electrolyte is insufficient, the battery should be charged or replaced in a timely manner.
Check electrical components: Check the working status of electrical components such as relays and switches to ensure that they can switch normally. Regularly check whether the output voltage, frequency, and other parameters of the generator are normal.
4、 Tiny generator operation and maintenance habits
Regular start-up and operation: Even when the generator is not in use, it should be started and operated regularly for a period of time to ensure that the generator is in good condition. It is recommended to start it at least once a week and let it run for a period of time.
Avoid overload operation: According to the rated power of the generator, arrange the load reasonably to avoid long-term overload operation. If the load suddenly increases or decreases, the cause should be checked and the generator should be ensured to operate stably.
Shutdown precautions: When the generator needs to be shut down, the load should be gradually reduced first, and then the output switch of the generator should be turned off. Wait for the engine to cool down before turning it off to avoid sudden shutdown causing damage to the engine.
By implementing the above maintenance precautions, the long-term stable operation of the tiny generator can be ensured, its usage time can be extended, and the possibility of malfunctions can be reduced.
More information on tiny generators:http://www.huaquan98.com/
